TRIPP LITE
Tripp Lite UPS monitoring.
MayaUPS monitors Tripp Lite SmartPro and SmartOnline UPS through the WEBCARDLX family and the WEBCARD-M3.
SUPPORTED HARDWARE
Models, network cards and firmware.
| Model family | Network card | Card firmware | Shutdown |
|---|---|---|---|
| SmartPro, SmartOnline | WEBCARDLX, WEBCARDLXE, WEBCARDLXMINI | Any | Yes |
| SmartPro, SmartOnline | WEBCARD-M3 | Any | Yes |
PDUs, transfer switches and sensors
- Tripp Lite automatic transfer switch
- Tripp Lite cooling unit
- Tripp Lite EnviroSense sensor
- Tripp Lite PDU
SmartPro and SmartOnline
Line-interactive SmartPro and double-conversion SmartOnline units report through WEBCARDLX, WEBCARDLXE, WEBCARDLXMINI or WEBCARD-M3 cards.
Tripp Lite readings
Battery capacity, remaining runtime, load, input and output voltage, battery temperature and self-test results.
Tripp Lite commands
Through the WEBCARDLX or WEBCARD-M3, MayaUPS turns the UPS output off once the protected servers are down and starts battery self-tests.
PDUs, ATS and EnviroSense
Tripp Lite PDUs, automatic transfer switches, cooling units and EnviroSense temperature and humidity sensors join the fleet.
Frequently asked questions
Does MayaUPS support the Tripp Lite WEBCARD-M3?
Yes, on SmartPro and SmartOnline units, as well as the WEBCARDLX, WEBCARDLXE and WEBCARDLXMINI.
Can MayaUPS read a Tripp Lite UPS over USB?
Yes. A Tripp Lite UPS connected by USB to a Windows or Linux server is read through the MayaUPS agent.
Next steps
Get a quote for your fleet.
We reply with a written proposal.