XPC
XPC UPS monitoring.
MayaUPS monitors Xtreme Power Conversion UPS, from the J60 and J90 to the P91, T91, TX91 and V80, through the SNMP-2PV3 card and the earlier NetAgent and Voltronic cards.
SUPPORTED HARDWARE
Models, network cards and firmware.
| Model family | Network card | Card firmware | Shutdown |
|---|---|---|---|
| J60C (600 VA lithium, 1U) | SNMP-2PV3 | 3.14 or later | Yes |
| J90, J90i | SNMP-2PV3 | 3.14 or later | Yes |
| P80, P80g | SNMP-2PV3 | 3.14 or later | Yes |
| P91, P91g, P91 5-10k, P91 Li, P91g Li, P90L, P90Lg | SNMP-2PV3 | 3.14 or later | Yes |
| T91, T91i | SNMP-2PV3 | 3.14 or later | Yes |
| TX91, TX91L, TXVR | SNMP-2PV3 | 3.14 or later | Yes |
| V70 (2026 list); V80, V80 Li, V80 XR, V80 HT (2024 list) | SNMP-2PV3 | 3.14 or later | Yes |
| Legacy NetAgent II / NetAgent 9 cards (SNMP-1PMINI, SNMP-1PIN, SNMP-R90, SNMP-3PEX, SNMP-1P3PIN, SNMP-2P3PIN) | NetAgent II / 9 (PEN 935) | Any | Yes |
| J60-600, J60i-600; J60 (c, i) on the 2024 list | SNMP-J60 (Voltronic) | Any | Yes |
| M90U, M90LU, M90U-80, M90U-140 | SNMP-2P3 (Voltronic) | Any | Yes |
| M90S-2S, M90S-4S, M90S-6S, M90S-12S, M90Si-6S | SNMP-M90S (Voltronic) | Any | Yes |
| Ai90, Li90, X90-1S, X90-2S, X90-5S, X90-10S, E91, M90C-2S, M90C-6S, M90Ci-2S, M90Ci-6S | SNMP-2PG1 (GENEREX CS141MINI-6) | Any | Yes |
PDUs, transfer switches and sensors
- XPC switched PDU, older model
- XPC SPD, older model
- XPC SPDU-0615C or SPDU-1415C
The full XPC range
Current P80, P91, T91, TX91 and V80 units on the SNMP-2PV3, M90 and X90 systems on their own cards, and older units on NetAgent II and NetAgent 9 cards, side by side.
XPC readings
Battery capacity and runtime, load, input and output voltage and frequency, and battery temperature, including the lithium-ion P91 Li and V80 Li models.
XPC commands
Through the SNMP-2PV3 and NetAgent cards, MayaUPS turns the UPS output off after the servers and starts battery tests.
XPC PDUs
XPC switched PDUs and SPDU-0615C and SPDU-1415C units appear with the UPS that feeds them.
Frequently asked questions
Which card firmware does MayaUPS need on an XPC SNMP-2PV3?
Firmware 3.14 or later on the SNMP-2PV3.
Does MayaUPS read older XPC NetAgent cards?
Yes. NetAgent II and NetAgent 9 cards, including the SNMP-1PMINI, SNMP-R90 and SNMP-3PEX, are supported.
Next steps
Get a quote for your fleet.
We reply with a written proposal.